Entirely front & rear dual service, efficient and fast.
Quick installation and disassembly, saving working time and labor cost.
High precision, solid and aluminum frame design.
In case of failure, it can be easily maintained.
Pixel detection and remote monitoring.
High Brightness up to 10000cd/m2.
High reliable and long lifespan. Strong and robust quality to withstand rigid climate and 7/24 hours working.
Strong Flame Resistance： Aluminum material, high temperature durability, fast heat-dissipation. The whole product can Reach 5VB fireproofing level.
Die-casting aluminum chasis, recycle rate 90% for the whole product. Stable and Reliable •Long lifetime. •30% Redundance while use 7000nits. Using 10000nits,3000nits can sustain 7000nits using for 5 years. •Good heat dissipation performance.
3 years warranty for LED module (10000nits version).Protecting Rating (front and rear): IP66 Full sealed die-casting aluminum module chassis. Water proof connectors(between modules) Drain hole is designed at the bottom of the panel to prevent ponding. IP66 : the high standard of Waterproofing Can be immersed in the specified water pressure for a long time.Cable-less deisgn Power and data cables are hidden at the bottom of the panel Hard Connection BTB connector replace data and power cables, high stability. Multiple size Available: 960*1280/960*960/960*640/1440*1280/ 1440*960mm Customized design Support custimzed 90°screenWeight: 28KG/㎡ for Aluminum frame Weight: 35KG/㎡ for mental frame Thickness: 75mm
● The die-cast aluminum module achieves seamless splicing and high flatness. ● Metal material up to 90%. Don't contains Any Plastic.
Traditional LED screen use many screws when to install or maintain. Aluminum chasis adopt edge lock without screwing design. • Traditional LED screen unconcealed components. Aluminum chasis adopt full sealed design, to protect its internal components. | Plastic Ratio | Aluminum Ratio | |
| Recycling | 1% | 85% |
High Brightness：SMD 10000nits Low power consumption. Noise-free Aluminum PSU
●Compared with the traditional SMD technology, 5000~6500 nits brightness is not easy to be seen in the strong sunlight. ●LED attenuation: brightness 5%-9% reduction every year. after 5 years Platinum still has around 7000nits. ●Calibration: After 2~3 years usage, after calibration, there is still strong brightness.| Save Power Consumption | Platinum P10mm Above 7000nits | General P10mm 6000nits |
| Average 150w/sqm | Average 300w/sqm | |
| 1 DAY *100SQM | 360(KW.h) | |
| 1 YEAR*100SQM | 100,000(KW.h) | |
| 3 YRS*100SQM | 300,000(KW.h) | |
| 5 YRS*100SQM | 500,000(KW.h) | |
